AU
Private university Islamabad, Multan, Kamra & Karachi Entry test: AU-CBT / NAT / SAT Formula not published by AU Updated September 2026

Air University Merit & Aggregate Calculator

Use this free Air University merit and aggregate calculator to work out your admission aggregate for Air University, Islamabad. Enter your Matric, HSSC and entry test marks, then see the score you need for your target merit.

Quick answer

The formula widely reported for Air University is Engineering: 10% Matric + 50% HSSC + 40% Test, and Non-Engineering: 15% Matric + 35% HSSC + 50% Test. Air University’s own official Eligibility Criteria page publishes minimum marks and required subjects, but not a merit weightage. Treat these numbers as the best available estimate, not an AU-confirmed figure.

Calculate your Air University merit

Free · instant · no login
Matric / SSC—
/
HSSC / FSc—
/
Entry Test score—
/

This uses the widely reported formula, not one confirmed on Air University’s own site. Always check the current admission notice for your programme.

What Entry Test score do you need?

Set your target merit and we work backwards from your Matric and FSc marks to the Entry Test score you need. The grid shows your merit at every score from 50% to 100% of the paper.

Air University Merit Formula 2027: What We Could and Could Not Confirm

Air University’s own official Eligibility Criteria page publishes minimum marks and required subjects for each programme group in detail, but it does not publish a merit weightage formula anywhere on that page.

The weightage below is widely and consistently reported:

Programme groupEntry TestHSSC / FScSSC / Matric
Engineering40%50%10%
Non-Engineering (Computing, Business and others)50%35%15%

Air University’s own site does not confirm this figure directly. Treat it as the best available estimate, and verify with your campus’s admission office if your decision depends on the exact number.

How to Calculate Air University Aggregate: Step-by-Step Guide

  1. Convert each result to a percentage. Divide obtained marks by total marks and multiply by 100.
  2. Multiply by the weightage for your route. Engineering: Test × 0.40, HSSC × 0.50, Matric × 0.10. Non-Engineering: Test × 0.50, HSSC × 0.35, Matric × 0.15.
  3. Add the three numbers. The total is your merit out of 100.

Worked example: Engineering

A student scores 950/1100 in Matric, 980/1100 in HSSC and 70/100 in the entry test.

ComponentMarksPercentageWeightagePoints
HSSC980 / 110089.09%50%44.55
Entry Test70 / 10070.00%40%28.00
Matric950 / 110086.36%10%8.64
Total merit——100%81.18%

Try these same numbers in the calculator above and you will get 81.18%.

Worked example: Non-Engineering

Same marks, using the Non-Engineering weightage instead:

ComponentPercentageWeightagePoints
Entry Test70.00%50%35.00
HSSC89.09%35%31.18
Matric86.36%15%12.95
Total merit—100%79.14%

Air University Entry Test (AU-CBT) and Accepted Alternatives

Air University runs its own computer-based test, commonly referred to as AU-CBT, and also accepts scores from other national tests as an exemption:

  • AU-CBT — Air University’s own computer-based admission test.
  • NTS NAT (NAT-IE, NAT-ICS, NAT-IM, or the category matching your stream).
  • SAT for exemption from the AU-CBT.
  • For exemption using an external test, a minimum score is generally required, and the test must have been taken within roughly one year of Air University’s admission closing date.

Confirm the exact exemption rules and minimum scores for the current cycle directly with Air University; these details are not on the official eligibility page.

Air University Merit Impact: How Much Is Each Mark Worth?

Under the Engineering route, HSSC carries the largest weight (50%); under Non-Engineering, the entry test carries the largest weight (50%). Here is what an extra 10 marks is worth in each case.

ImprovementEngineeringNon-Engineering
+10 marks in the entry test (out of 100)+4.00 points+5.00 points
+10 marks in HSSC (out of 1100)+0.46 points+0.32 points
+10 marks in Matric (out of 1100)+0.09 points+0.14 points

For Engineering applicants, a strong HSSC result matters more than any other single input. For Non-Engineering applicants, the entry test is the highest-leverage place to focus.

Air University Eligibility Criteria 2027 (Minimum Marks)

These minimums are confirmed directly from Air University’s own Eligibility Criteria page:

Programme groupMinimum marksSubjects required
Engineering60% in Intermediate (Part I and II)Physics, Chemistry and Mathematics
Computing50% in HSSC or A-Level equivalent (12 years of schooling)Mathematics
General programmes50% in Intermediate (Part I and II) of any boardAny stream

These figures come from Air University’s own published eligibility page. The merit weightage above is not published on the same page.

Air University Campuses This Page Covers

Air University runs undergraduate admission across more than one campus, each with its own admission portal:

  • Islamabad — the main campus.
  • Multan — Air University Multan Campus.
  • Kamra — Air University Kamra Campus.
  • Karachi — Air University Karachi Campus.

Confirm which campus and portal apply to your application, since programme availability and closing merit differ across campuses.

Air University Closing Merit: What Aggregate Do You Need?

There is no single number: closing merit depends on the campus, the programme and that year’s applicant pool. Popular programmes such as Computer Science and Electrical Engineering are typically more competitive than others.

Use the previous cycle’s official closing merit for your campus and programme as your target, then use the required-score tool above to see the entry test score you need to reach it.

How to Improve Your Air University Merit Score

  • Check which route applies to you first. Engineering and Non-Engineering use different weightage under the reported formula, so confirm which one matches your programme.
  • Engineering applicants: prioritise HSSC. It carries the largest reported weight (50%), more than the entry test.
  • Non-Engineering applicants: prioritise the entry test. It carries the largest reported weight (50%) on that route.
  • Ask about exemption rules if you already have a SAT or NAT score. You may not need to sit the AU-CBT separately.
  • Confirm the exact formula with your campus. Since Air University does not publish the weightage on its own eligibility page, treat this calculator as an estimate and verify before you rely on it.
  • Apply broadly. Consider more than one university so a single test day does not decide your whole year.

Common Air University Aggregate Calculation Mistakes to Avoid

  • Using the Engineering split for a Non-Engineering programme, or vice versa. The reported weightage differs meaningfully between the two.
  • Treating this formula as officially confirmed. It is widely reported, but not published on Air University’s own eligibility page.
  • Averaging the three components. The entry test and HSSC are weighted differently by route, so a simple average gives the wrong answer.
  • Assuming one campus’s process applies to all. Islamabad, Multan, Kamra and Karachi run separate admission processes.
  • Treating the estimate as final. Only Air University’s own merit list is official.

Frequently asked questions

What is the Air University merit formula?

The formula widely reported for Engineering programmes is 10% Matric, 50% HSSC and 40% Entry Test. For Non-Engineering programmes, it is 15% Matric, 35% HSSC and 50% Entry Test. Air University’s own eligibility page publishes minimum marks but not a weightage formula.

Is the Air University merit formula officially published?

Not on Air University’s own eligibility page. That page details minimum marks and required subjects by programme, but does not state a merit weightage. The 10/50/40 and 15/35/50 splits are widely and consistently reported.

How is the Air University aggregate calculated?

Convert your Matric, HSSC and entry test marks to percentages, apply the weightage for your route, and add the results. For example, Matric 950/1100, HSSC 980/1100 and entry test 70/100 give 81.18% under the Engineering formula.

What is the difference between the Engineering and Non-Engineering formulas?

Engineering weights HSSC highest at 50%, with the entry test at 40% and Matric at 10%. Non-Engineering weights the entry test highest at 50%, with HSSC at 35% and Matric at 15%.

What entry test does Air University accept?

Air University runs its own AU-CBT, and also accepts NTS NAT and SAT scores for exemption, generally subject to a minimum score and a validity window of around one year before the admission closing date.

What is the minimum eligibility for Air University?

Engineering requires 60% in Intermediate with Physics, Chemistry and Mathematics. Computing requires 50% in HSSC or A-Level equivalent with Mathematics. General programmes require 50% in Intermediate from any board. These are confirmed on Air University’s own eligibility page.

How much does the entry test matter compared with HSSC and Matric?

It depends on your route. For Engineering, HSSC (50%) matters more than the entry test (40%). For Non-Engineering, the entry test (50%) matters more than HSSC (35%). In both routes, Matric has the smallest effect.

What entry test score do I need to reach a target merit?

Subtract your Matric and HSSC points from your target and divide by 0.40 (Engineering) or 0.50 (Non-Engineering). Use the required-score tool on this page to do this for your own marks and route.

Which Air University campuses does this formula apply to?

Air University has campuses in Islamabad, Multan, Kamra and Karachi, each with its own admission portal. Confirm which campus you are applying to, since programme availability and closing merit differ.

What merit do I need to get into Air University?

It depends on the campus, programme and applicant pool that year, so there is no fixed number. Use the previous cycle’s official closing merit for your campus and programme as a target, then use the required-score tool to see the score you need.

Is this the official Air University merit?

No. This is an independent estimator using the most widely reported formula we could find, since Air University does not publish its own weightage on the eligibility page we checked. Your official merit position is published by Air University on its own admissions portal.

Why is my merit different from the one Air University published?

Common reasons are using the wrong route (Engineering vs Non-Engineering), a different actual weightage than the widely reported one, using the wrong entry test total, or rounding. Confirm the exact formula with your campus’s admission office.

Official Air University Admission Links & Resources

These are Air University’s own pages, including the eligibility page this calculator’s eligibility figures are taken from. They open in a new tab.

Air University admissions

Equivalence and recognition

How this page was checked. Minimum eligibility marks and required subjects are confirmed directly from Air University’s own Eligibility Criteria page (webdata.au.edu.pk), reviewed September 2026. That page does not publish a merit weightage formula. The 10-50-40 (Engineering) and 15-35-50 (Non-Engineering) weightage shown here is the figure most consistently reported by independent sources, not one confirmed on Air University’s own site. This site is independent and is not affiliated with Air University. Your official merit position is on Air University’s own admissions portal.

About This Calculator

This Air University merit calculator is built by the GPATOCGPACalculator.pk team to help Pakistani students estimate their admission aggregate before merit lists are published. It is independent and is not affiliated with Air University.

Disclaimer: This tool is for estimation only. Admission formulas and closing merits change every year. Always confirm with Air University's official admission notice.